unisonic technologies co., ltd utt30p06 preliminary power mosfet www.unisonic.com.tw 1 of 3 copyright ? 2011 unisonic technologies co., ltd qw-r502-622.a 60v, 30a p-channel power mosfet ? description the utc utt30p06 is a p-channel power mosfet using utc?s advanced technology to provide the customers with high switching speed and a minimum on-state resistance. it can also withstand high energy in the avalanche. the utc utt30p06 is suitable for low voltage and high speed switching applications ? features * r ds(on) =0.067 ? @ v gs =-10v, i d =-15a * high switching speed ? symbol ? ordering information ordering number pin assignment lead free halogen free package 1 2 3 packing UTT30P06L-TA3-T utt30p06g-ta3-t to-220 g d s tube note: pin assignment: g: gate d: drain s: source
utt30p06 preliminary power mosfet unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r502-622.a ? absolute maximum ratings (t c =25c, unless otherwise specified) parameter symbol ratings unit drain-source voltage v dss -60 v drain-gate voltage (r gs =1.0 m ? ) v dgr -60 v continuous v gss 15 v gate-source voltage non ? repetitive (t p 10ms) v gsm 25 v t c =25c i d -30 a continuous t c =100c i d -19 a drain current pulsed (t p 10 s) i dm -105 a power dissipation 125 w derate above 25c p d 0.83 w/c junction temperature t j +175 c storage temperature t stg -55~+175 c notes: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. when surface mounted to an fr4 board using the minimum recommended pad size. ? thermal data parameter symbol ratings unit junction to ambient ja 62.5 c/w junction to case jc 1.2 c/w
utt30p06 preliminary power mosfet unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r502-622.a ? electrical characteristics (t j =25c, unless otherwise specified) parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss i d =-0.25ma, v gs =0v -60 v drain-source leakage current i dss v ds =-60v, v gs =0v -10 a forward v gs =+15v, v ds =0v +100 na gate- source leakage current reverse i gss v gs =-15v, v ds =0v -100 na on characteristics (note 1) gate threshold voltage v gs(th) v ds =v gs , i d =-250a -2.0 -2.6 -4.0 v static drain-source on-state resistance r ds(on) v gs =-10v, i d =-15a 0.067 0.08 ? v gs =-10v, i d =-30a -2.0 -2.9 v drain-source on-voltage v ds(on) v gs =-10v, i d =-15a, t j =150c -2.8 v dynamic parameters input capacitance c iss 1562 2190 pf output capacitance c oss 524 730 pf reverse transfer capacitance c rss v gs =0v, v ds =-25v, f=1.0mhz 154 310 pf switching parameters (note 2) q t 54 80 nc q 1 9.0 nc q 2 26 nc gate charge q 3 v gs =-10v, v ds =-48v, i d =-30a 20 nc turn-on delay time t d(on) 14.7 30 ns rise time t r 25.9 50 ns turn-off delay time t d(off) 98 200 ns fall-time t f v gs =-10v, v dd =-30v, i d =-30a, r g =9.1 ? 52.4 100 ns source- drain diode ratings and characteristics drain-source diode forward voltage v sd i s =-30a, v gs =0v -2.3 -3.0 v body diode reverse recovery time t rr 175 ns body diode reverse recovery charge q rr i s =-30a, v gs =0v, di s /dt=-100a/s 0.965 c notes: 1. pulse test: pulse width 300 s, duty cycle 2%. 2. switching characteristics are indepen dent of operating junction temperature. utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
